Sensor Object List:

A robust GPS NMEA parser in the 'GPS Str NMEA' object with float interface and navigation routines in the 'GPS Float' object

See notes for "MCP3208_fast" object. Allows support of up to 24 ADC channels with one object. Supports up to three MCP3208 ADC chips with fast access and fast averages to ...

This demo connects a PropStick USB to the H48C Accelerometer and HM55B Compass. It outputs the
x,y,z from the H48C and the heading from the HM55B to the Parallax Serial ...

Interfaces with National's ADC0808 analog to digital converter. Includes my debugger program and suggested connection diagram. If you're in EEE174 at CSUS you can use this code, but Dahlquist will ...

kalmanfilter for MIMU

This code is for use with the DS2760 Kit from Parallax. This code reads the values out of the DS2760 and calculates the thermocouple temperature.

Warning: this object is not ...

The AD7705 and AD7706 are complete 16-bit, low-cost, Sigma Delta ADCs intended for dc and low-frequency ac measurement applications.
An integrated amplifier makes it possible to measure voltages up to ...

74hc597 v1.0
Data acquisition cog reading up to 4 74hc597's in series. A 74hc597 is an 8-bit latch/shift register. It grabs digital inputs in two stages. This cog free runs ...

This cog free runs sampling all 8 A to D channels sequentially. The ADC088S052 is a good choice to work with the Prop as it uses a 3.3v supply. For ...

Interface to the Gyration MG1101 dual axis gyroscope. Has two demo programs and one object.

One demo shows engineering units of degrees/sec, millivolts, and degrees Celsius.

The other demo shows ...