Protocol Object List:

Full duplex asynchronous serial object.

v1.2 - 5/7/2009 fixed bug in dec method causing largest negative value (-2,147,483,648) to be output as -0.

1-wire device interface routines and demos. Low-level routines include network device search and CRC-8 calculation.

This project is my first project oon the propellor. It controls 2 Max6956 IC's on I2C. The MAX6956 is a 20-/28-port LED driver with a resistor-set LEDcurrent limit and digital ...

A BlinkLED.spin file and a PCDebugTest, with two articles by Jon Williams.

Starts UART object in a cog at specified baud rate for debug, using FullDuplex.spin.

This driver allows you to connect up to sixteen 8255 Programmable Peripheral Interface chips together on a shared bus. Each 8255 has 24 configurable bidirectional io pins so for applications ...

Extends out FullDuplexSerial to allow reception of character strings that end in a carriage return for decimal, hexadecimal and alpha-numeric uses. Allows use of timeout values. This version also allows ...

Implements some of the ideas in Andy Lindsay's IR Remote for the Boe Bot in propeller spin. Decodes five bits from a Sony IR TV remote and provides for displaying ...

The IR_Remote.spin object receives and decodes keycodes from a TV remote control. The procedure to read and decode is run in a separate cog. This eliminates the big problem of ...

Counter A is used to send Sony TV remote codes to an IR led (Parallax #350-00017). The test program uses a Panasonic IR Receiver (Parallax #350-00014) to receive and decode ...