Tool Object List:

This is a driver for Winbond Flash Memory (W25X16AVDAIZ 2MB) as well as equivalent 4MB and 8MB memories. It also supports 1 or 2 Microchip 23K256 SPI SRAM. It provides ...

Small program that sits on eeprom allowing for code update through sd card attached to pins p0-p3

requirements:
512kbit EEPROM instead of normal 256kbit
SD or uSD card reader on ...

This object works with the Parallax Serial Terminal; see Propeller Downloads page or install Propeller Tool v1.2.6 (or newer).

It includes handy methods for output/input (Char, CharIn, Str, StrIn, Dec, ...

This object emulates an RTC (Real Time Clock) using the timebase of the Propeller. Accuracy is only as good as the crystal. In my testing, there was about 2 seconds ...

This technique, rather than object, demonstrates how to store the PASM portion of an object into the upper area of EEPROM (above 32K). This technique is used to reclaim back ...

On first boot will generate a random 256 bit ID number and store it in eeprom. Later boots will always have the same id number.

Allows the user to view specific bits of a value, write specific bits of a value, and fill entire bits of a value. See the subroutine comments for more information ...

Extension of the RCTIME object in the library.

Uses FloatMatch to calculate actual resistance in a RC circuit, given the capacitance (or visa versa)

This object dumps the Propeller main RAM in hex and ASCII, all in assembly. The minimum baud rate is 9600 baud at 80MHz, because of the 14 bit PAR register.

An implementation of a timer process manager for adding multiple procedures to a cog using a singly linked list and malloc. User needs a "..\output" directory for this project to ...