Data Storage Object List:

This is a driver for Winbond Flash Memory (W25X16AVDAIZ 2MB) as well as equivalent 4MB and 8MB memories. It also supports 1 or 2 Microchip 23K256 SPI SRAM. It provides ...

This file is a driver for the Vinculum FTDI chip using an SPI interface. Using SPI a single byte can be transferred in 4.8uS. This code was tested using the ...

ummc_fsys contains objects to read and write binary, text, and comma separated files in either FAT16 or FAT32 format on a SD or MMC type flash memory card. It uses ...

A stable and easy to use UART datalogger object with high transfer speeds.

This object handles the storage and retreval of variables (indexed by arbitrary word-sized integers) and data which need to persist across power cycles. Very easy to use, and thread safe. ...

Tested! With this code you can read/write a SDcard with an uAlfat SD Storage Module from GHI electronics. Check the demo to see how to make use of the file.

Driver for the NXP PCF8583 Real Time Clock.

- I2C communication with chip.
- Get/Set functions for RTC time registers.
- v0.95 - Burst Read for full date or full ...

Driver for SPI-SRAM N256S0830HDA. 3 drivers in download for 1 bit, 2bit and 4 bit wide memory board. Download contains schematic and PCB layout for a 4bit wide memory board. ...

This is a spimple fifo, it is multi cog able.
Only one cog can read at the same time! The same for writing.
So if two cogs will try to ...

memStick_fsys contains objects to read and
write binary, text, and comma separated
files in either FAT16 or FAT32 format on
a flash memory stick or card. It
uses the Parallax ...