Warning message

The Propeller Object Exchange system is decommissioned and replaced with a GitHub repository to house the same existing and future Propeller objects. As of 12/5/2019, this site is read-only. You can continue to browse and download objects from here for a limited time; however, please begin using the Parallax Propeller repository for future reference.
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0
Request group membership
By: created: 2011-03-27 | updated: 2013-06-17

SW programming interface to the 4D Systems uOLED-160-G1SGC display and carrier board (latter supports a joystick and speaker). The software contained here for this display conforms to revision 4.0 (March 9, 2011) of the GOLDELOX-SGC Command Set Software Interface Specification. The PmmC firmware for the GOLDELOX-SGC graphics processor on the display board must be up to date in order to fully utilize all the software commands implemented here. Much of this code was adapted from the µOLED-160-GMD1 object written by Steve McManus.


Original File Upload
Package icon 4D-Systems-uOLED-160-G1SGC.zip54.11 KB