uLCD(SK)-32PTU Touch Screen v2.0 DEMO Driver

Warning message

The Propeller Object Exchange system is decommissioned and replaced with a GitHub repository to house the same existing and future Propeller objects. As of 12/5/2019, this site is read-only. You can continue to browse and download objects from here for a limited time; however, please begin using the Parallax Propeller repository for future reference.
  • 1
  • 2
  • 3
  • 4
  • 5
Total votes: 0
Request group membership
By: created: 2015-01-22 | updated: 2015-01-22

General info:

This is a simple/small driver for the uLCD(SK)-32PTU. This driver uses the common Parallax serial terminal as it's maincommunication system. This LCD is a good choice for many reasons and seems to have a little bit of everything. It candraw boxes, lines, triangles, and is equipped with a built in speaker, not to mention it has a touch screen that is supereasy to interact with.  It can display text and graphics and makes it relatively easy to understand. It is capable of 65thousand colors in two bytes and has a resolution of 320x240 pixels. It also uses a reliable communication system.

**** For Display Configuration information: ****

Please refer to Section 2.1 of the "PICASO Serial Command Set Reference Manual" PDF. Also visit the Youtube video: http://www.youtube.com/watch?v=ZIlAoABmQ0w


Revision History:  uLCD(SK)-32PTU --> migrated from uOLED-128-G2 display

  • 10-05-2013
    • - first release
  • 10-25-2013  v1.0
    • - added functions that were undocumented in original GOLDELOX-SPE-COMMAND-SET-REV1.3 datasheet
    • - changed constant naming to reflect PICASO-GFX2-4DGL-Internal-Functions-rev3  datasheet
  • 11-06-2013  v2.0
    • - modified display commands for the uLCD(SK)-32PTU display
    • * known issues:
      • - file mounting problems with some SD cards affecting other file related commands
      • - media operations mounting the SD card seem to be ok, but are not fully tested


Original File Upload
Package icon uLCDSK-32PTU_v2.0.zip50.82 KB